QPST Flash Tool For Qualcomm Cpu (All Version)

The Vivo Firmware Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Vivo Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. Thanks visit my blog!

QPST Flash Tool For Qualcomm Cpu (All Version) 2021

NameDownload Link
QPST_2.7.496.zip (New)MediaFire
QPST_2.7.495.zipMediaFire
QPST_2.7.480.zipMediaFire
QPST_2.7.477.zipMediaFire
QPST_2.7.474.zipMediaFire
QPST_2.7.473.zipMediaFire
QPST_2.7.472.zipMediaFire
QPST_2.7.464.zipMediaFire
QPST_2.7.460.zipMediaFire
QPST_2.7.456.zipMediaFire
QPST_v2.7.453MediaFire
QPST_v2.7.447MediaFire
QPST_v2.7.445MediaFire
QPST_v2.7.422MediaFire
QPST_v2.7.420MediaFire
QPST_v2.7.366MediaFire
QPST_v2.7.363MediaFire
QPST_v2.7.104MediaFire

How to Use QFIL Tool:

  1. Download ROM & Unzip Stock. Check that file extension is either in the format of.mbn or content.xml.
  2. If so, download Qfil’s Tool & Install.
  3. Then click Programmer Path to select Flat Build and select Program file with the.mbn extension.
  4. Click on the file Load XML & choose Raw Program. After Raw Program selection, you must select Patch File.
  5. Connect Phone Holding Boot key The section “No Port Available” at the top of  the tool display will show Qualcomm USB port.
  6. Click on Download to start Flashing.

Flash Contents.XML File:

  1. Select Meta Build & Click Programmer’s path and select the extension file.mbn.
  2. Click Load Content & Select File.xml.
  3. Connect Phone Holding Boot key The section “No Port Available” at the top of the tool display will show Qualcomm USB port.
  4. Click on Download Content.xml to start Flashing.

How to Flash Vivo Firmware (Stock ROM)

  1. Download and Extract the Vivo firmware package on the computer.
  2. Once you have extracted the firmware Package, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Manual.
  3. Install the provided Qualcomm USB Driver on the computer.
  4. Once you have successfully installed the USB Driver, Open QPST Flash Tool on the computer.
  5. Once the QPST Flash Tool is Launched, Connect your Vivo Device to the computer using the USB Cable.
  6. Click on the Download or Upgrade Button in the QPST Flash Tool to begin the Flashing process.
  7. Once the flashing process is completed, you will get a Success Message at the End.
  8. Disconnect your Vivo device from the computer and Restart it.

Readme Once:

[*] Backup: We recommend taking a backup of your data from the device before flashing or writing the Stock Firmware or IMEI because flashing the stock firmware or IMEI may wipe your data from the device.

[*] Credits: The above firmware is officially released by Vivo Communication Technology. We have scanned the firmware using the Malwarebytes Premium before sharing it online.

error: Content is protected !!